Sourcing Hardware
With the aim to keep this project accessible, where possible, hardware choices favour common 3D printer related hardware, and design decisions are made in ways to minmise the BOMs.
Sourcing Guides
For an up-to-date and complete BOM with prices and sourcing information for all AERIS projects, visit the sourcing guide. For information about ordering the custom PCBs, view this page.
Sourcing Guide
The access link (also shared above) is view-only. Therefore if you wish to make changes and use the check boxes, you will need to save your own copy.
Bill Of Materials (BOMs)
Not all hardware in the complete BOMs is required. Use the key below to understand what you need. Where hardware is grouped as optional (indicated by the subscript), then that whole group is optional and not the individual components.
- Required
- n Recommended
- n Optional
| Item # | Component | Quantity | Required |
|---|---|---|---|
| 1 | AERIS Breakout Board | 1 | |
| 2 | SEN55-SDN-T | 1 | |
| 3 | XIAO ESP32-C3/C6 | 1 | |
| 4 | M3x4 BHCS | 6 | |
| 5 | M3x5x4 Threaded Inserts | 2 | |
| 6 | JST GH1.25 - 6P 100mm | 1 | |
| 7 | JST XH2.54 - 5P | 2 | |
| 8 | JST XH2.54 - 2P | 1 | 1 |
| 9 | 3007 5V Fan | 1 | 1 |
| 10 | 1k Ohm Resistor | 1 | 1 |
| 11 | 2N2222 Transistor | 1 | 1 |
| 12 | SSD1309 Display - 1.54" I2C | 1 |
| Item # | Component | Quantity | Required |
|---|---|---|---|
| 1 | AERIS Expansion Board | 1 | |
| 2 | BME280 5V I2C | 1 | |
| 3 | SCD41 5V I2C | 1 | |
| 4 | JST XH2.54 5P | 2 |
| Item # | Component | Quantity | Required |
|---|---|---|---|
| 1 | AERIS Nano Breakout Board | 1 | |
| 2 | XIAO ESP32-C3/C6 | 1 | |
| 3 | BME280 5V I2C | 1 | |
| 4 | 2006 5V Fan | 1 | 1 |
| 5 | JST XH2.54 2P | 1 | 1 |
| 6 | 1k Ohm Resistor | 1 | 1 |
| 7 | 2N2222 Transistor | 1 | 1 |
| 8 | SSD1306 Display - 0.96' I2C | 1 |